Code: 5.1.15
PS-LED 5V 100VA Switching power supply for LED Strips 5V 100VA
Input voltage: 100-240VAC 47 / 63HzOutput voltage: 5V DCOutput Current: 20A maxPower: 100VA maxSuitable: For power led strip and other electronic appliancesDimensions: 199x98x42 mmWeight: 0,4 Kgr
Code: 5.1.14
PS-LED 5V 50VA Switching power supply for LED Strips 5V 50VA
Input voltage: 100-240VAC 47 / 63HzOutput voltage: 5V DCOutput Current: 10A maxPower: 50VA maxSuitable: For led strip and other electronic appliancesDimensions: 158x98x42 mmWeight: 0,201 Kgr
Code: 5.3.20
RGB-CABLE Adaptor for Led RGB 5050 strips with pin without wire
Adaptor for Led RGB 5050 strips with pin without wireConnector: 4 Pin
Code: 5.3.2
WALL-LED RGB Dimmer 9A
Input voltage: 12-24V DCOutput current: 3X3A max / channelPower: 108W maxSuitable: For brightness LED RGB stripsFeatures: Ability to adjust brightness for each RGB color switchDimensions: 130x40x45mmWeight: 0,110Kg
Code: 5.2.2
LED-MODULE single color led cold white module SMD 5730
Light Color: Cool WhiteBrightness: 100LMBeam angle: 120 °Life Span: 50,000 hoursOperating voltage: 12V DCPower: 1,2W / unitSuitable: For lighting of neon signs and other professional or domestic spaceDimensions: 75Ch12mmOperating temperature: -30C + 60CStorage temperature: -40C + 80CFeatures: Self-adhesive film allows easy topothetisikai integrated heatsink
Protection: IP65
Code: 12.3.11
A2-V2 20A DC Analog ammeter 0?20A DC screw-type
Indications: Analog current (Amper)
Support: On the front panel with 2 screws
Dimensions: 60x60mm
Note: For the proper functioning of the amperometer is required to use Shunt (resistance) 20A
Code: 12.3.10
A2-V2 10A DC Analog ammeter 0?10A DC screw-type
Indications: Analog current (Amper)Support: On the front panel with 2 screwsDimensions: 60x60mm
Code: 12.3.3
FC4-0-50A DC Digital amperometer 0-50 A DC
Operating voltage: 8-12 V DC
Indicators: Digital (LCD screen 3 bits) of the current (Amper)
Dimensions: 62x40x25mm
Note: For proper operation of the amperometer required shunt (resistance)
Code: 12.3.2
FC4-0-50V DC Digital voltmeter 0-50V DC
Operating voltage: 220V AC 8-12 V DC
Indicators: Digital (LCD 3 digit display) voltage (Volt)
Dimensions: 70x40x30mm
Code: 5.3.10
MINI-LED RGB Amplifier 12A
Input voltage: 12-24V DCOutput current: 3x4A max / channelPower: 144W maxSuitable: For brightness LED RGB stripsOperating temperature: -20C + 60CIt has 3 Controls : color, flashing speed, flashing mode
Code: 5.3.13
LED-CABLE ADAPTOR Adaptor for Led strip 5050 single color with power cord male DC connector 5,5X2,1mm
Adaptor for Led strip 5050 single color with power cord male DC connector 5,5X2,1mm and pin
Connector: 2 Pin (male)
Cable length: 15cm
It allows the tape for easy installation without the use of tools and special solder
Code: 5.3.18
LED-CASE ADAPTOR Adaptor for Led strip 5050 single color with pin without wire
Connector: 2 Pin (male)
Code: 5.3.19
LED-CASE RGB ADAPTOR Adaptor for Led RGB 5050 strips with pin without wire
Connector: 4 Pin (male)
Code: 5.3.21
RGB-ADAPTOR-1 4-pin male to 4-pin male adapter for connecting two RGB 5050 LED strips or one RGB 5050 LED strip to an RGB controller/dimmer
Adapter with 4 pin female and 4 pin male for connect two Led RGB strip 5050 or one led RGB 5050 strip with RGB Dimmer Controller
Code: 5.3.22
RGB-ADAPTOR-2 4-pin male to 4-pin male adapter for connecting two RGB 5050 LED strips or one RGB 5050 LED strip to an RGB controller/dimmer
Adapter with 4 pin female to 4 pin female for connect two Led RGB strip 5050 or one led RGB 5050 strip
with RGB Dimmer Controller
